Aquavage • The Ultimate Fat Harvester
.
  • Home
  • Videos
  • Product
  • Contact
  • FAQ's

Frequently Asked Questions


What is the ideal vacuum level for fat harvesting?  Information provided at the IFATS conferences (International Federation for Adipose Therapeutic and Science)  recommends keeping vacuum at or below 18 inHg(450 mmHg). For best results keep your vacuum between 14 and 18 inHg (360 and 450 mmHg).

Does it matter what kind of aspirator I use? The Aquavage is designed to work with any vacuum system. Your current system should have control, and enough power to maintain a consistent vacuum level of 18 inHg (450 mmHg). 

What type of cannula is best for fat harvesting?  We recommend a 12-14 guage, or 2, 3 or 4 mm cannula.  A simple hole pattern is sufficient, but if you have a favorite cannula pattern, that will work fine.

How does the Aquavage compare to other fat transfer devices available?  First, it starts with saline in the bottom of the canister to immediately enable separation of the fat as it flows in from your cannula. When fat hits the saline, it immediately separates and floats to the top.It is designed for simplicity of operation, without mesh systems that clog up, basic bucket systems that rely on the tumescent to separate, and colander systems that are exposed and volatile to the cells.

Can the Aquavage be reused? No, it is designed as a sterile pack system; single patient use. It cannot be re-sterilized or reused for another procedure, primarily because it could never be cleansed and sterilized sufficiently for secondary use. Contamination is possible if reused.
For more specific questions please contact us directly.
Picture
Powered by Create your own unique website with customizable templates.